- Three shapes of conference table surfaces: Standard boat shape, Racetrack, and Rectangular.
- Stylish heavy gauge steel base and leg panels. Removable rear access panel on legs for infeed cable. Available in Mayline Corporate colors as well as new Tech Silver paint finish with laminate or veneer leg inserts.
- Surfaces available in high pressure laminate with durable T-mold knife edge or Espresso and Bourbon Cherry veneer.
- All tables are 29.5" high.
- Tables are available in 96"W x 42"D, 120"W x 48"D (not available in veneer), 144"W x 54"D, 216"W x 54"D and 288" W x 54" D. For tables 12' and longer, a modular table design is utilized combining starter and adder sections. For tables larger than 24' simply order additional 6' adders to build your table in 6' increments.
- An adder support leg and additional power well is included with each 6' adder.
|
- Each table is standard with an undersurface technology opening and trough to support the user's power, data and media requirements. The opening is covered by a "floating" acrylic cover that can be easily removed to access power and other telecom options from the surface of the table. One opening in 8' and 10' tables, two openings in a 12' table and an additional opening per 6' adder required.
- Steel trough runs the entire length of the surface between the legs of the table. Easily removed access panel doors allow entry into either side of the trough to mount racking, run cables or install power and data options. Power kit options available. See Accessories link for details.
- realoffice™ accessories available to coordinate with Witchcraft and Biltmore Cherry high pressure laminate and Espresso and Bourbon Cherry veneer to complete your conference room requirements.
|
